Personal Service
Since 1999

PRODUCTS AND SERVICES

Being Informed

Start Here!

Do I Have a V-M?

V-M Model Finder

FAQ and Restoration Tips

Sales and Service Literature

Phono / Record Changer

Needles/Styli

Cartridges

Cartridge Installation Parts

Phono Wheels and Turrets

Phono Belts

Phono Motor Mounts

45 rpm Adapters

Center Post Spindles

Turntable AC & Sound Cords

V-M Changer AC Switches

V-M Turntable Mats & More

V-M & RCA 45 Player Parts

Other V-M Phono Parts

Phono Accessories

Tape Recorder

Wheels and Pressure Rollers

Tape Recorder Belts

V-M Recorder Repair Kits

Other V-M Recorder Parts

Tape Recorder Accessories

Amplifiers, Tuners, and Speakers

V-M Amplifiers and Tuners

V-M Speakers

Restoration Services

V-M Record Changers

V-M Tape Transports

Other Restoration Options

V-MAE and V-M History

V-M Audio Enthusiasts

About V-MAE

Newsletter

Fun Page!

What we Buy

Links

V-M Corporation

Brief History

Products and Photos

Other Brands using V-M

Home  |  Why Buy Here?  |  Policies  |  Ways To Buy  |  Shopping Cart  |  Contact us

Phono and Turntable Idler Wheels and Turrets

Record player, record changer, turntable, and phonograph idler / drive wheels and turrets are available as rebuilt with new rubber at the driving surface for most equipment. Some parts may be new old stock if good, less popular parts can be custom rebuilt, and tires will be shown in search results where available as follows:

Idler Wheels and Turrets - Some require mail in of old part before replacement ships!

Use one of the search methods below and click Go. On the next page, click on part picture for details and price. Replacement idler wheel or turret may look somewhat different than original so compare based on measurements given. If you don't find what you need, we can custom rebuild your old part.
 

Phono, turntable idler wheels and turrets ordering information - please read the following:

1. Find your part as discussed above using one of the search methods.

2. Read the Part Description - most idler wheels require mail in of the old part. Idler wheels are no longer made, so they must be rebuilt with new rubber at the driving surface.

3. Add to cart by clicking on price next to shopping cart and place the order (international will first require us to add shipping & Handling).

4. Receive purchase confirmation email (check junk folder) and mail in old part in small box or padded envelope. Our address is on the email, and is also on the Contact us page.

5. Once the old part is received, in almost all cases the replacement will be shipped immediately from our rebuilt stock (or good new old stock in some cases). Your old part will be rebuilt with new rubber at the driving surface to help someone else in the future. Exception to the fast shipping may be if listing page says "rebuilt stock is low". This pertains to certain less common wheels. If so, we will advise on wait time (if any).

Special situations:
If you do not have the old part, and it is required to be mailed in, Contact us before ordering.
If there is no replacement for your wheel, it can be custom rebuilt (normally 4 weeks timing). Contact us for order information.

We have phono and turntable idler wheels and turrets for popular brands including Voice of Music, Admiral, BSR, Collaro, Elac, Garrard, GE, Glaser-Steers, Magnavox, Motorola, Panasonic, Philco, RCA, Telefunken, Zenith, and others.

If you are not sure what turntable idler wheel or turret you need, first click on Phono Wheel Help! for identification information and then Contact us with details. We are at your service!